HOW TO: KILL BILL MARBLE COASTER
Sep13

HOW TO: KILL BILL MARBLE COASTER

You start with a couple of “blank” marble tiles. I chose white ones: Then spraypaint them both black: I designed the silouette in 3Ds Max and exported it as a DXF file. I used the file on a vinyl-cutter. Download DXF file here You could probably create the silouette using an x-acto knife if you dont have access to a vinyl-cutter. Then you carefully apply the vinyl to the marble tiles: Now all you have to do is spraypaint...

Read More
SAMSUNG CHARGING STATION
Sep06

SAMSUNG CHARGING STATION

I wanted to have a charging station for both my phone and smart watch. This project was just a small project, but ended up to be one of my favourites as it works exactly how i intended it to work. I printed it on the Form 1+ 3D printer, but because of the size of the design i had to print it in two parts and glue it back toghether. The charger for the smart watch (Galaxy Gear S) had a tab on the side that i had to dremel of to get it...

Read More
LASER ENGRAVING MARBLE
Sep03

LASER ENGRAVING MARBLE

After purchasing a new house there was a bunch of leftover marble tiles 10cm x 10cm in size. I decided to use some of them to create some coasters with engraved logos on them. Laser setup: 40% Power and 200mm speed

Read More
LASER ENGRAVING DENIM JEANS
Sep02

LASER ENGRAVING DENIM JEANS

I have seen other people having great success engraving clothing. After purchasing some new clothes i was ready to throw away a pair of denim jeans, so this was a perfect opportunity to try engraving fabric. I am glad i didnt use those jeans anymore cause when i tested with different power and speed settings i ended up engraving trough the pant leg. I ended up using 30% power and 200mm/s speed. I could (and should) use higher power...

Read More
MAKING A STAMP WITH THE LASER ENGRAVER
Sep02

MAKING A STAMP WITH THE LASER ENGRAVER

I wanted to try out engraving rubber sheets so i could make a stamp. I purchased the rubber sheets on ebay. Engraving the rubber sheets was pretty easy, but there was alot of smoke. So if you use a laser engraver without a fan leading the smoke out of the house i wouldnt try this. The stamp handle was printed on the makerbot replicator Stl file can be downloaded here: stamp...

Read More
CAR ROOF WIRE CANAL
Aug30

CAR ROOF WIRE CANAL

I got a request to make a simple wirecanal for mounting on top of a car roof. The design is based on a regular canal, but added threads and 2 nuts for easy installment. This was printed on a Formlabs Form 1+ and then i glued the top and bottom parts together. Then i spraypainted the whole thing black and then the top portion was...

Read More