WATER SENSOR
Sep28

WATER SENSOR

This is a simple sensor for detecting water. This is a project that i made for someone at work, that needed a water-sensor for detecting leaks from washing machines. This is a portable battery powered device that is easily put on the floor in front of the machine in the usual path of running water (The floor has a slight tilt). The sensor itself is made up of two paralell wires and a 1 Mohm resistor, so when water comes between the...

Read More
CZ DUAL MAG HOLSTER
Aug18

CZ DUAL MAG HOLSTER

I really wanted to make my own holsters for practical shooting competitions. After some back and forth i landed on making a dual model, which would keep the mags always at the same location to each other. I found this great looking dual mag from XD GEAR when i did i quick google search: Since it is next to impossible to buy weapon accessories from overseas i figured i would use this as a reference when designing my own dual mag...

Read More
SPRING LOADED EXTRUDER
Aug03

SPRING LOADED EXTRUDER

After a while my Makerbot Replicator 1 Dual had become unreasonably unreliable. I got frequent air-prints, in fact almost every time. There is a well known fact that the delrin plunger design Makerbot came up with, is a bad design. After a fair amount of use the plunger gets worn out and does no longer make the tight fit that the filament need to be extruded properly. On thingiverse there is a spring loaded design that is much better...

Read More
CLASH OF CLANS BARBARIAN KING
Jul04

CLASH OF CLANS BARBARIAN KING

This was a fun little project i made for my son. He really wanted me to print one of the characters from the game Clash Of Clans. A quick google search led me to http://www.myminifactory.com/object/barbarian-king-clash-of-clans-871which contained a 3D model of the “barbarian king” from the game. Ricardo Alves from the UK made this 3D file, and all credit goes to him for the downloadable (and not to mention FREE) character....

Read More
GOPRO HEADMOUNT
Jun28

GOPRO HEADMOUNT

I made this to be used in the sport of practical shooting. I designed it so i could mount it directly to my earmuffles as i didnt want to wear both the “original” headmount in addition to the earmuffles. It just becomes too much. The housing has to be glued to the housing mount, because i didnt want to print with support (wanted it to look as “clean” as possible). When viewing the downloadable STL files it is...

Read More
3D PRINTABLE TOOLHOLDERS
Jun27

3D PRINTABLE TOOLHOLDERS

Here are some miscellaneous toolholders that can be scaled to fit practically any tool. I was in the market for something like this myself, and was looking around searching for toolholders. The problem however is that there ar alot more different sized tools than there are toolholders that match, so then you end up with something that just looks awful and doesnt fit 100% to anything. So regarding this project the goal was to make many...

Read More