DIY POKEMON POKEBALL
Sep25

DIY POKEMON POKEBALL

My son really wanted a pokeball for his 11th birthday so i decided to make one for him. I had a switch lying around that would be perfect for this project so i designed the ball around that. First i designed the pokeball in 3Ds Max Then i printed it with the Formlabs Form 2 3D printer After removing the support material, i sanded the 2 pieces pretty smooth. Here i did a test fitting of the switch. Fits perfectly 🙂 I then glued into...

Read More
FORM 1+ LARGE MIRROR CHANGE
Apr20

FORM 1+ LARGE MIRROR CHANGE

Recently i had some trouble with my Form 1+ 3D printer, and i had to send it to England for repair. It turned out to be a defective laser. When i recieved the repaired unit, someone at the repaircenter messed up the large mirror in the machine. The mirror had small white spots on it that was impossible to clean of. So the repaircenter sent me a replacement mirror for me to install in the machine, so her is a “How To”...

Read More
FORMLABS FORM 2 UNBOXING AND SETUP
Feb21

FORMLABS FORM 2 UNBOXING AND SETUP

The Form 2 arrived in a large cardbord box. Inside was some smaller boxes containing the machine itself, the cleaning station and the resin cartridge. The top part of the box contained the resin tray, build-platform and a small box containing USB cable and a couple of leveling tools. The Form 2 was not packaged like the Form 1 was (floating between plastic), but wedged between 2 large foam pieces. Here are the ingenious leveling-tools...

Read More
SAMSUNG CHARGING STATION
Sep06

SAMSUNG CHARGING STATION

I wanted to have a charging station for both my phone and smart watch. This project was just a small project, but ended up to be one of my favourites as it works exactly how i intended it to work. I printed it on the Form 1+ 3D printer, but because of the size of the design i had to print it in two parts and glue it back toghether. The charger for the smart watch (Galaxy Gear S) had a tab on the side that i had to dremel of to get it...

Read More
CAR ROOF WIRE CANAL
Aug30

CAR ROOF WIRE CANAL

I got a request to make a simple wirecanal for mounting on top of a car roof. The design is based on a regular canal, but added threads and 2 nuts for easy installment. This was printed on a Formlabs Form 1+ and then i glued the top and bottom parts together. Then i spraypainted the whole thing black and then the top portion was...

Read More
SHARK TABLECARDS
Nov01

SHARK TABLECARDS

Recently my son has had this facination about sharks, so when he wanted a shark-themed birthday his mother and i decided to make custom seating arrangement cards that all of his friends could take with them when they left the party. When scouring the internet for a suitable shark 3d model i came across this model on thingiverse by the user XYZWorkshop. http://www.thingiverse.com/thing:192007 Since i recently got a Form 1+ 3d printer i...

Read More