Defective CW-3000 Water Chiller
Sep09

Defective CW-3000 Water Chiller

So, the day finally came. I went to turn on the lasercutter and all i could hear was the warning beeps from the chiller….. Believe me, it was not a good feeling 🙁 My first thought was that there might be too little water in the tank, so i checked. To my surprise it did seem a little low, so i figured i could just fill it up and i would be back up and running. Well no such luck….. It was still beeping. So i rolled up my...

Read More
Post processor for Fusion 360 and CNC USB Controller
Jul26

Post processor for Fusion 360 and CNC USB Controller

I have had some trouble finding a suitable post processor for fusion 360 that works with CNC USB Controller. After some time i realized that i couldn’t find one and tried to remedy this problem for myself. After a lot off trial and error i managed to modify a reprap post processor into working. I have only tried it for a couple of jobs, but it seems to be working flawlessly. Since i know how hard it is to find a working...

Read More
Error: Tool orientation is not supported.
Jul23

Error: Tool orientation is not supported.

Error: Tool orientation is not supported. ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Error: Failed to invoke function ‘onSection’. Error: Failed to invoke ‘onSection’ in the post configuration. Error: Failed to execute configuration. Stop time: Sunday, July 23, 2017 12:47:10 PM Post processing failed. I have to admit that this problem almost made me abandon Fusion 360. I felt like i had tried everything, but...

Read More
X700 INSTALLATION OF A MILLIAMPEREMETER
Oct22

X700 INSTALLATION OF A MILLIAMPEREMETER

I have been wanting to install a milliamperemeter in my lasercutter/engraver for some time. The reason for this is that i haven’t been able to make the lasertubes last as long as they are advertised. I recently  purchased a Reci 100W tube, and this time i want it to last as long as possible. Here is a link to the tube i ordered. The life span can reach 10,000 hours if the current is kept below 26mA. Here is the analogue...

Read More
DIY POKEMON POKEBALL
Sep25

DIY POKEMON POKEBALL

My son really wanted a pokeball for his 11th birthday so i decided to make one for him. I had a switch lying around that would be perfect for this project so i designed the ball around that. First i designed the pokeball in 3Ds Max Then i printed it with the Formlabs Form 2 3D printer After removing the support material, i sanded the 2 pieces pretty smooth. Here i did a test fitting of the switch. Fits perfectly 🙂 I then glued into...

Read More